CoaDATA 4004

CoaDATA 4004
Instrument type Analyzer for determination of plasmic clotting
Measurement principle Turbodensitometry with automated start function
Incubation block Heated to 370C (controlled at 37.40C ± 0.30C)
4 operating measuring channels with magnetic mixer motor
4 reagent positions diameter 23.0 mm (one of this equipped with magnetic mixer function)
4x4 cuvettes incubation positions
Light protection cap with yellow dot
Test volume 150-300 µL
Cuvette micro cuvette
Display 2 line with 20 characters, liquid cyrstal display
Control panel Membrane keypad
Programmed methods PT: in sec, %, RATIO, INR
aPTT: in sec and RATIO
Fibrinogen : in sec, g/L, and mg/L
Thrombin Time : in sec
Intr. Factor : in %
Extr. Factor : in %
Interface RS 232C
Chip CARD reader, MMC Card
Operating Voltage 230V / 50 Hz
Power consumption 80 VA
Dimensions WxDxH : 27.3 x 34.8 x 12.5 cm
Weight 5.3 kg
Printer Internal thermal printer, 26 characters per line
Test throughput PT 60/h, aPTT 30/h, +/- 20 test/h
Catalog No. Product Packaging
CoaDATA 4004 CoaDATA 4004 Unit
CoaDATA 4004, D-Dimer CoaDATA 4004, D-Dimer Unit
Your partner in system concepts and customized developments
This new manual coagulation analyzer is an opto-mechanical coagulation analyzer which applies the turbodensitometric measuring principle. This measuring principle is especially suited for lipemic and/or icteric colored samples. All routine coagulometric clotting tests such as Prothrombin Time, activated and partial Thromboplastin Time, Fibrinogen, and single Factor assays can be performed with CoaDATA 4004. Results printed via external printer (optional) or can be read from the display.

service@setia-medika.co.id

support@setia-medika.co.id

0812 – 2000 – 6006

Related Information

Events|Blog|Locations|News|e-Catalogue
© Copyright 2016 PT.Setia Medika.
All rights reserved.

CoaDATA 4004

CoaDATA 4004
Instrument type Analyzer for determination of plasmic clotting
Measurement principle Turbodensitometry with automated start function
Incubation block Heated to 370C (controlled at 37.40C ± 0.30C)
4 operating measuring channels with magnetic mixer motor
4 reagent positions diameter 23.0 mm (one of this equipped with magnetic mixer function)
4x4 cuvettes incubation positions
Light protection cap with yellow dot
Test volume 150-300 µL
Cuvette micro cuvette
Display 2 line with 20 characters, liquid cyrstal display
Control panel Membrane keypad
Programmed methods PT: in sec, %, RATIO, INR
aPTT: in sec and RATIO
Fibrinogen : in sec, g/L, and mg/L
Thrombin Time : in sec
Intr. Factor : in %
Extr. Factor : in %
Interface RS 232C
Chip CARD reader, MMC Card
Operating Voltage 230V / 50 Hz
Power consumption 80 VA
Dimensions WxDxH : 27.3 x 34.8 x 12.5 cm
Weight 5.3 kg
Printer Internal thermal printer, 26 characters per line
Test throughput PT 60/h, aPTT 30/h, +/- 20 test/h
Catalog No. Product Packaging
CoaDATA 4004 CoaDATA 4004 Unit
CoaDATA 4004, D-Dimer CoaDATA 4004, D-Dimer Unit
Your partner in system concepts and customized developments
This new manual coagulation analyzer is an opto-mechanical coagulation analyzer which applies the turbodensitometric measuring principle. This measuring principle is especially suited for lipemic and/or icteric colored samples. All routine coagulometric clotting tests such as Prothrombin Time, activated and partial Thromboplastin Time, Fibrinogen, and single Factor assays can be performed with CoaDATA 4004. Results printed via external printer (optional) or can be read from the display.

service@setia-medika.co.id

support@setia-medika.co.id

0812 – 2000 – 6006

Related Information

© Copyright 2016 PT.Setia Medika.
All rights reserved.