CoaDATA 501

CoaDATA 501
Instrument type Analyzer for determination of plasmic clotting
Measurement principle Turbodensitometry with automated start function
Incubation block Heated to 370C (controlled at 37.40C ± 0.30C)
1 measuring cell with magnetic mixer motor
1 reagent position diameter 23.0 mm
4 cuvettes incubation positions
Light protection cap with yellow dot
Test volume 150-300 µL
Cuvette micro cuvette
Display 1 line with 8 characters, liquid cyrstal display
Control panel Membrane keypad
Programmed methods PT: in sec, %, RATIO, INR, (combinations)
aPTT: in sec and RATIO
Fibrinogen : in sec, g/L, and mg/L
Thrombin Time : in sec
Intr. Factor : in %
Extr. Factor : in %
Interface RS 232C (Optional printer)
Chip CARD reader
Operating Voltage 12 V DC
Power consumption 9.6 VA
Dimensions WxDxH : 9.7 x 21.2 x 5.2 cm
Weight 0.6 kg
Test throughput PT 30/h, aPTT 15/h, +/- 10 test/h
Catalog No. Product Packaging
90.200.0015 LABITEC CoaDATA 501 Unit
Your partner in system concepts and customized developments
This new manual coagulation analyzer is an opto-mechanical coagulation analyzer which applies the turbodensitometric measuring principle. This measuring principle is especially suited for lipemic and/or icteric colored samples. All routine coagulometric clotting tests such as Prothrombin Time, activated and partial Thromboplastin Time, Fibrinogen, and single Factor assays can be performed with CoaDATA 501. Results printed via external printer (optional) or can be read from the display.

service@setia-medika.co.id

support@setia-medika.co.id

0812 – 2000 – 6006

Related Information

Events|Blog|Locations|News|e-Catalogue
© Copyright 2016 PT.Setia Medika.
All rights reserved.

CoaDATA 501

CoaDATA 501
Instrument type Analyzer for determination of plasmic clotting
Measurement principle Turbodensitometry with automated start function
Incubation block Heated to 370C (controlled at 37.40C ± 0.30C)
1 measuring cell with magnetic mixer motor
1 reagent position diameter 23.0 mm
4 cuvettes incubation positions
Light protection cap with yellow dot
Test volume 150-300 µL
Cuvette micro cuvette
Display 1 line with 8 characters, liquid cyrstal display
Control panel Membrane keypad
Programmed methods PT: in sec, %, RATIO, INR, (combinations)
aPTT: in sec and RATIO
Fibrinogen : in sec, g/L, and mg/L
Thrombin Time : in sec
Intr. Factor : in %
Extr. Factor : in %
Interface RS 232C (Optional printer)
Chip CARD reader
Operating Voltage 12 V DC
Power consumption 9.6 VA
Dimensions WxDxH : 9.7 x 21.2 x 5.2 cm
Weight 0.6 kg
Test throughput PT 30/h, aPTT 15/h, +/- 10 test/h
Catalog No. Product Packaging
90.200.0015 LABITEC CoaDATA 501 Unit
Your partner in system concepts and customized developments
This new manual coagulation analyzer is an opto-mechanical coagulation analyzer which applies the turbodensitometric measuring principle. This measuring principle is especially suited for lipemic and/or icteric colored samples. All routine coagulometric clotting tests such as Prothrombin Time, activated and partial Thromboplastin Time, Fibrinogen, and single Factor assays can be performed with CoaDATA 501. Results printed via external printer (optional) or can be read from the display.

service@setia-medika.co.id

support@setia-medika.co.id

0812 – 2000 – 6006

Related Information

© Copyright 2016 PT.Setia Medika.
All rights reserved.